How To Clean a Rug at Home ?

 Step 1- Know When It’s Time to Clean

Regular vacuuming is great for weekly maintenance, but dust and dirt can settle deep into the fibres. This can be especially hard to see in colourful, patterned rugs. To determine when it’s time to clean your rug, it’s best to examine it closely. 

Pick up a corner of the rug and drop it. If it emits a cloud of dust, it’s time for a deep clean some areas look darker or uneven in colour. If so, it’s cleaning time. Gently rub over a high-traffic spot in the rug. If it feels rough and matted down or has residue, the rug is holding in the dirt. Take a sniff. If the rug doesn’t smell clean, it isn’t clean.

Step - 2 Check Rug Label

Some rugs may be easy to clean in your washer and dryer. Small cotton rugs and washable rugs fit into this category. For other rugs, it’s best to see if they are tagged with cleaning instructions. Unless specific guidelines are attached, most rugs can be hand cleaned or you can use a machine. 

Tip: If you have an especially fragile antique or vintage rug, consult a professional rug cleaner.

Step -3 Gather Your Tools

Cleaning a rug can be time-consuming. With the right supplies, you can move the job along quicker. You’ll need a vacuum cleaner and a rug beater or broom. Get carpet stain remover and a rug shampoo. A 5-gallon bucket is just the right size for mixing the cleaner.

 Use a garden hose with a spray nozzle for rinsing. Other cleaning supplies include white towels, large sponges, a soft bristle brush and a tarp to use as a work surface. For drying, get a squeegee to push out excess water. A box fan is a handy appliance that will help the rug dry even faster. 

Tip: Plan to clean your rug on a sunny day. The fresh air, heat and sunshine will speed up the drying process. If an outside area is not available, use an indoor area that moisture will not damage such as a kitchen or garage floor.

Step - 4 Remove Dirt & Dust

Vacuum the rug in place. Empty the filter on the vacuum cleaner to make sure you capture as much dirt and dust as possible. After a thorough vacuuming, take the rug outside. Hang it over a fence, outdoor table, sawhorses or sturdy chairs. Use a rug beater or broom to beat the rug. 

This will release and loosen deep-down dirt and dust. If you have allergies, wear a dust mask. Don’t forget to shake out the rug pad too.

Step - 5 Wash & Rinse Rug

Someone applying a cleaning solution to an area rug. Some cleaners come ready to apply. Others need diluting. Have a five-gallon bucket handy and follow the cleaner’s instructions. For a homemade solution, drop two to three teaspoons of mild dish soap into the bucket and fill it with warm water.

 Once your solution is ready, lay a tarp on a flat surface. A patio or driveway works well. Place the rug on top of the tarp. The tarp will prevent the bottom of the rug from picking up extra dirt from the work surface. Before you start scrubbing, test the cleaning solution to make sure it won’t affect the dyes on your rug. 

Dab the cleaning solution on a small corner of the rug. Rub the spot with a white towel to ensure the colour stays on the rug. Once dry, check for fading or colour bleed. If the colours hold fast, you’re ready to go. If not, consider dry cleaning your area rug.

Using a sponge, work the cleaning solution into small areas of the rug. Work on one area at a time. Repeat the steps until the entire rug is clean. Scrub the rug with a bristle brush if needed to remove stains or excess dirt.

Step - 6 Rinse & Dry Rug

Using a hose with a spray nozzle, start at one end of the rug and rinse. Continue moving across the rug until the water runs clear. Repeat if necessary. Remove any excess water by pushing a squeegee in parallel rows from one side to the other. Follow the grain of the rug fibres. Repeat if necessary.

It is important to remove as much water as possible from the rug. Find an elevated place to dry the rug. You can hang the rug over two sawhorses, sturdy chairs or bed risers. The key is to provide airflow on both the top and bottom. Rotate the rug during drying. 

If you can, place it in a sunny spot outside. You can also use a box fan to speed up drying time. Make sure the rug is completely dry before laying it back on the floor. Use a vacuum or brush to set the fibres back in place.

Step - 7 Area Rug Maintenance Tips

To keep that brand-new rug feeling, vacuum your rug regularly. Once or twice a week should do it, depending on foot traffic and pets. Before vacuuming, sprinkle on a little baking soda or odour eliminator. It’s also a good idea to rotate a rug on occasion for even wear. 

In case of spills or stains, spot-clean the rug right away. Area rugs add warmth and character to any space. Keep your area rugs bright and spotless with our tips on how to clean a rug. Examine your rug carefully to determine when it needs deep cleaning. 

 Now that you know the ins and outs of how to clean a rug, get the tools and supplies you need to keep it looking great.